No Internet, Secured: Effective Tips For Fixing This Issue on Windows 10
Seeing the “No Internet, Secured” message on your Windows 10 computer? Your device is linked to the internet, but you can’t access any websites. This frustrating error can happen for several reasons, but the good news is that it’s usually fixable.
In this article, we’ll show you some simple steps you can take to get your internet connection up and running again in no time.
What does “No Internet, Secured” message mean?
The “No Internet, Secured” message might seem confusing if you’re not familiar with how your internet connection functions. However, it actually makes sense when we break it down.
Your computer isn’t directly connected to the internet itself. Instead, it communicates through a network router, which acts as a bridge between your computer and the wider internet called the Wide Area Network (WAN). Additionally, your computer is connected to other devices within your home network, forming the Local Area Network (LAN). Even if there’s an issue with the internet connection, the LAN can still function properly.
The “No Internet, Secured” status message indicates that your connection to the Wi-Fi router is secure and encrypted (“Secured”), but you’re not receiving any data from the internet. Essentially, your computer is connected to the router, but the internet connection is not working. To resolve the issue, we need to troubleshoot and identify why the internet connection is not functioning.
Troubleshooting “No Internet, Secured” error on Windows 10
Here’s a range of effective methods to try and resolve the frustrating connectivity issue.
Check your Wi-Fi connection
Start by making sure your Wi-Fi is turned on and your device is connected to the correct network. Look for the Wi-Fi icon in the system tray at the bottom-right corner of your screen and ensure it’s enabled.
Restart your router and modem
Unplug both your router and modem from the power source, wait for about 30 seconds, and then plug them back in. This simple step can often resolve connectivity issues and refresh your network connection.
Disable and re-enable your network adapter
Press the Windows key + X on your keyboard and select “Device Manager.” Expand the “Network adapters” category, right-click on your Wi-Fi adapter, and choose “Disable.” After a few seconds, right-click again and select “Enable.”
Check your VPN connection
Sometimes, conflicts between your VPN and network settings can cause connectivity issues. The VPN’s kill switch feature, designed to disconnect your internet in case the VPN server goes down, can sometimes cause this error.
To check whether the VPN is the problem, disconnect it and exit the client completely. Wait a few seconds, reconnect to the internet, and visit a frequently updated website. If the website loads properly, it indicates that the VPN server was causing the problem. To fix it, update your VPN software if available, or try using a different VPN service.
Update your network adapter driver
Outdated or incompatible drivers can cause connectivity problems. Visit the manufacturer’s website for your computer or network adapter and look for the latest driver version. Download and install it following the provided instructions.
Forget and reconnect to your Wi-Fi network
Open the “Settings” app by pressing the Windows key + I, then select “Network & Internet” and click on “Wi-Fi” in the left sidebar. Under “Known Networks,” find your Wi-Fi network, click on it, and select “Forget.” Afterward, reconnect to the network by entering the password.
Run the Network Troubleshooter
Windows 10 includes a built-in troubleshooter that can automatically detect and fix common network issues. Press the Windows key + I, select “Network & Internet,” and choose “Status.” Scroll down and click on “Network troubleshooter” to run the diagnostic tool.
Sometimes, IPv6 settings can interfere with your internet connection. To disable it, go to “Network & Internet” settings, click on “Change adapter options,” right-click on your Wi-Fi network, select “Properties,” and uncheck “Internet Protocol Version 6 (TCP/IPv6).” Click “OK” to save the changes. Check out this post for a detailed step-by-step guide on how to disable IPv6.
If you’re still experiencing the “No Internet, Secured” error after trying these steps, it might be worth contacting your internet service provider for further assistance.
Why does “No Internet, Secured” error occur on my device?
The “No Internet, Secured” error can occur on your Windows 10 device due to a few common reasons. Let’s explore them briefly.
- Network connectivity issues. Sometimes, there may be problems with your Wi-Fi connection, such as a weak signal or a temporary disruption in the network. This can lead to an error message.
- Incorrect network settings. Misconfigured settings on your device, such as an incorrect IP address or DNS settings, can prevent proper internet access and result in an error.
- Outdated or faulty network drivers. If your network adapter drivers are outdated or incompatible, they may not work effectively, leading to connectivity problems and the “No Internet, Secured” error.
- VPN interference. If you use a VPN, certain settings or features like the kill switch may interfere with your internet connection and trigger the error message.
- Router or modem issues. Problems with your router or modem, such as firmware glitches or hardware malfunctions, can disrupt the connection between your device and the internet, causing the error to appear.
Encountering the “No Internet, Secured” error on your Windows 10 device can be frustrating, but armed with some troubleshooting tips, you now have a range of effective solutions at your fingertips.
You can tackle the most common causes of this error by checking your Wi-Fi connection, restarting your router and modem, forgetting and reconnecting to your Wi-Fi network, and considering VPN interference.
We hope that by implementing these tips, you’ll be able to regain a stable and secure internet connection on your Windows 10 device. Stay connected and enjoy seamless online experiences.